Hydrostatic Road Sweeper

Machine has ability to work in low areas throught machine’s technology 10cm lowering-rising feature. Sweeping and discharging operations are made by hydraulic drive mechanical system.

Technical Specifications

Model : RSW-S5C

Drive 4×4 hydraulic

Front axle extension system to prevent turning the machine while driving in transport mode

DIMENSIONS OF THE MACHINE – mode of transportation (variable axis outwards)

-Maximum width (variable axis outwards)  1400mm

-Maximum length (including brushes)  3600mm

-Maximum height (without folding headlight)  2000mm

-Back base  1400 mm 

DIMENSIONS OF THE MACHINE – operating mode (variable axis inwards)

-Length, incl. brushes  3400mm

-Width of the case with folded brushes  1200mm

-Height  2000mm

Turning radius incl. brushes  4200mm

Gross weight with included load  2700kg

Water tank  190L

Waste hopper  made of stainless steel;

volume – minimum 1 cubic meter, unloading-height 1400 mm  500L

Sweeper:  2brushes with a diameter of  600 mm 1standard working width  1800mm

Maximum hill climb  21%

Fuel  diesel

Suction system  Suction-fan system with cyclone dust separation. Two oppositely rotating “floating” brushes with height adjustment from the cab and independent lever control of the width of the passed lane.

DEDUCTION SYSTEM  Two water nozzles located one above the sweeping brushes spraying in front of

the sweeping area to reduce dust emissions in operation. Additional high-speed rotary nozzle (rotary mist generator) located in the area between the two brushes injecting a fine water jet in the form of imitation mist for additional dedusting of fine dust particles.

14. VEHICLE LOADS

   – Front axle without load                                                        1100 kg

   – Front axle maximum weight with load                             1300 kg

   – Rear axle without load                                                          800 kg

   – Rear axle maximum weight with load                              1400 kg

15. VEHICLE SPEED

   – Forward travel mode (Transport mode)                          25 km / h

   – Reverse gear (Transport mode)                                          10 km / h

   – Forward travel mode (Operating mode)                          20 km / h

   – Reverse gear (Operating mode)                                         10 km / h

16. ENGINE TYPE

   – Type 4 cylinders turbodiesel volume                                 1400 cm

   – Power minimum                                                                     40 HP (horsepower)

   – Maximum torque                                                110 Nm at 2000 rpm

   – Idle speed                                                                                1100 rpm

   – Engine speed in cleaning mode                                          2800 rpm

   – Engine speed in transport mode                                        3000 rpm

   – Use of biodiesel                                                                      5% for the EU standard EN14214 and EN590

   – Fuel consumption during normal operation                    4 liters / hour

   – Engine oil type                15w40 API CE / SG – ACEA 2 (European)

   – Engine oil capacity                                                                 6 liters

   – Cool type                                                                                  50/50 water / antifreeze (ethylene glycol permanent)

   – Cooler capacity (total for the system)                               15 liters

   – Capacity of the fuel tank                                                      50 liters

17. HYDRAULICS

   – Oil specification                           15w40 API CE / SG – ACEA 2 (European)

   – Working capacity of the hydraulic tank                            30 liters

   – Intake fan                                                                                 2800 rpm

   – Brush motor                                                                            speed 105 rpm

18. BRAKES

   – Rear brake pads                                                                     hydro servo with manual adjustment

   – Front brake pads                                hydro servo with manual adjustment

19. PRESSURE CLEANING DEVICE

   – Water flow                                                         10 to 15 liters / minute

   – Maximum water pressure                                                   100 bar

20. AIR CONDITIONING

21. REAR VIEW CAMERA AND MONITOR